Forged olet Fitting
Threaded Flexolet
GS MetalFit offers Threaded Flexolet fittings for branch connection requirements in industrial piping systems, subject to the specified fitting design, material and connection requirements. The source catalogue lists material options across stainless steel, carbon steel, alloy steel, duplex, super duplex, high-nickel alloys and cupro nickel.
Threaded Flexolet is the specified product for this page. Threaded configurations may use NPT threads where required by the project specification. The precise design, thread form, dimensions and compatibility with the run pipe must be confirmed before ordering.
Product Type:
Threaded Flexolet
Size :
1/8" NB to 24" NB, as listed for socket-weld and threaded configurations; confirm the applicable range for Threaded Flexolet
Pressure Class:
1500#, 3000#, 6000# and 9000#
About This Product
Threaded Flexolet
GS MetalFit provides enquiries for Threaded Flexolet fittings and related branch connection products. Olet fittings are used to form a branch connection from a run pipe or header. The correct fitting must be selected according to the required branch arrangement, thread specification, material grade, dimensions and piping design requirements.
The source catalogue identifies a broad range of material options, including stainless steel grades such as ASTM A182 F304, F304L, F316 and F316Ti; carbon steel ASTM A105; duplex and super duplex grades; and specialised alloys such as Nickel 200, Inconel 625, Monel 400 and Hastelloy C276.
The supplied information also refers to forged fittings and multiple Flexolet configurations, including threaded, socket-weld and butt-weld variants. These are separate connection options and should not be treated as interchangeable. The actual Threaded Flexolet design, thread type and manufacturing specification should be confirmed against the required drawing or project specification.
GS MetalFit can review product enquiries based on the required sizes, material, connection details, pressure class, applicable standards and inspection requirements.
Technical Specifications
Manufacturing Processes
- Forging, where applicable
- Free Forging, where applicable
- Plate Cutting, where specified
- Threading to the agreed specification
- Heat Treatment, where required
- Dimensional Preparation and Verification
Inspection, Testing and Supporting Documents
- Material Test Certificate (MTC)
- EN 10204 Type 3.1 / Type 3.2, where agreed
- Intergranular Corrosion (IGC) Test Report, where applicable
- Material Dimension Chart
- Heat Treatment Chart, where applicable
- Positive Material Identification (PMI) Report, where specified
- Chemical Analysis Report
- Approved Laboratory Test Reports, where required
- Quality Assurance Plan (QAP), where agreed
- Hardness Testing Report, where applicable
- Mechanical Properties Report
- Pressure Testing Documentation, where applicable
- Radiography Test Report, where specified
- Flattening / Flaring Test Reports, where applicable
- Third-Party Inspection Report, where agreed
Related Product Forms
Other Outlet Types Listed
- Welding Outlet
- Socket Outlet
- Threaded Outlet
- Lateral Outlet
- Sweep Outlet
- Nippo Outlet
- Elbow Outlet
- Coupling Outlet
- Flex Outlet
- Braze Outlet
Packing Options
Compliance Reference
Materials & Grades
Stainless Steel Threaded Flexolet
ASTM A182 F304 / F304L / F304H
ASTM A182 F316 / F316L / F316Ti
ASTM A182 F317 / F317L
ASTM A182 F321 / F321H
ASTM A182 F347 / F347H
ASTM A182 F309 / F310S
ASTM A182 F904L
SMO 254 — UNS S31254
Alloy Steel Threaded Flexolet
ASTM A182 F5
ASTM A182 F9
ASTM A182 F11
ASTM A182 F12
ASTM A182 F22
ASTM A182 F91
Carbon Steel Threaded Flexolet
ASTM A105 / ASME SA105N
ASTM A350 LF2
Duplex & Super Duplex Threaded Flexolet
Duplex Steel:
ASTM A182 F51 — UNS S31803
ASTM A182 F60 — UNS S32205
Super Duplex Steel:
ASTM A182 F53 — UNS S32750
ASTM A182 F55 — UNS S32760
F61 / UNS S32550, where applicable
Zeron 100, subject to specification
Nickel Alloy Threaded Flexolet
Nickel 200 — UNS N02200
Nickel 201 — UNS N02201
Inconel 600 — UNS N06600
Inconel 601 — UNS N06601
Inconel 625 — UNS N06625
Inconel 718 — UNS N07718
Inconel 725 — UNS N07725
Incoloy 825 — UNS N08825
Hastelloy Threaded Flexolet
Hastelloy B2 — UNS N10665
Hastelloy B3 — UNS N10675
Hastelloy C276 — UNS N10276
Hastelloy C22 — UNS N06022
Hastelloy C2000 — UNS N06200
Hastelloy X — UNS N06002
Monel Threaded Flexolet
Monel 400 — UNS N04400
Monel K500 — UNS N05500
Cupro Nickel & Copper Alloy Threaded Flexolet
Cupro Nickel 90/10 — UNS C70600
Cupro Nickel 70/30 — UNS C71500
CuNi10Fe1Mn
CuNi30Mn1Fe
Cupro Nickel C71640
Aluminium Bronze C61400
Nickel Aluminium Bronze C63000
Naval Brass C46400
Other Special Materials for Threaded Flexolet
Alloy 20 — UNS N08020
Titanium Grade 2
Titanium Grade 5, where applicable
Incoloy 800, subject to specification
Other special alloys on request
Applications
Threaded Branch Pipe Connections
Main Pipe to Branch Pipe Connections
Industrial Piping Systems
Threaded Outlet Configurations
Thread Type and Connection Selection
Material Grade and Specification Selection
Threaded Flexolet Selection Note: Threaded Flexolet is a branch connection fitting listed in the outlet fitting catalogue. Selection depends on the run pipe and branch sizes, confirmed fitting configuration, thread type, connection dimensions, material grade, wall thickness and operating conditions. Verify the applicable design and piping specifications with the supplier before final selection.
Why Choose GS MetalFit?
Broad Material Selection
Threaded Flexolet material requirements can be reviewed across stainless steel, carbon steel, alloy steel, duplex, super duplex, nickel alloys and copper-nickel alloys, subject to the selected product specification and availability.
Thread Connection Review
Thread type, connection dimensions and the required fitting configuration can be reviewed against the customer's drawing and applicable piping requirements.
Size and Schedule Selection
Run pipe size, branch outlet size and wall thickness can be assessed to help identify a suitable Threaded Flexolet configuration for the specified piping system.
Design and Pressure Verification
Pressure class and operating requirements should be checked against the confirmed fitting design, material, dimensions, thread specification and applicable standards.
Material Documentation
Material test certificates and relevant inspection documents can be discussed during the enquiry stage and confirmed according to the order specification.
Inspection and Testing Requirements
Applicable testing, inspection plans and third-party inspection requirements can be specified for review, subject to product requirements and order confirmation.
Project-Specific Technical Review
Customers can share technical drawings, material grades, pipe dimensions and governing standards for assessment before the product quotation is prepared.
Enquiry-Led Product Supply
GS MetalFit supports product enquiries and quotation requests based on the customer's technical and project-specific requirements, without online checkout.